普洱附近想过夜电话联系

Welcome to Yongsheng Machinery. We provide you with mixing machine, feeding machine, automatic mixing line, PET film cleaning line and PE film cleaning line  Scan, the content is more wonderful

National service hotline

thirteen billion seven hundred and seventy-three million two hundred and twenty-one thousand one hundred and sixty-eight
 Immortal machinery
 Immortal machinery
Where you are now: homepage > News > Industry information >

Maintenance of mixer

Release date: 15:01, September 29, 2020

    Horizontal mixer The new rotor structure can adjust the minimum clearance between the rotor and the bright body to close to zero, effectively reducing the residual amount of materials; it can crush the larger materials, the overall structure is more reasonable, the appearance is beautiful, the installation and maintenance of the operation and maintenance party; the maintenance of the machine is an extremely important and frequent Work, it should be closely coordinated with the operation and maintenance, there should be full-time personnel on duty inspection.
1. The bearing bears all the load of the machine, so good lubrication has a great relationship with the service life of the bearing, which directly affects the service life and operation rate of the machine. Therefore, the lubricating oil injected must be clean and the sealing must be good. The main oil filling places of the machine are as follows:
(1) Rotating bearing
(2) Roller bearing
(3) All gears
(4) Movable bearing, sliding plane
 Horizontal mixer
2. The newly installed tyre is easy to loosen and must be checked frequently.
3. Attention blender Whether all parts work normally.
4. Pay attention to check the wear degree of the easily worn parts and replace the worn parts at any time.
5. Dust and other things should be removed from the underframe plane of the movable device, so as to prevent the movable bearing from moving on the underframe when the machine encounters materials that can not be broken, thus causing serious accidents.
6. If the temperature of bearing oil rises, stop the machine immediately and check the cause to eliminate it.
7. If there is impact sound when the rotating gear is running, stop the machine immediately to check and eliminate it.